A reliable drug test that detects traces of ETG (alcohol) in urine with a cut-off of 500 ng/ml.
This is a rapid test to detect Ethyl Glucuronide (ETG) in urine, which is a breakdown product of alcohol. ETG is a highly sensitive biomarker for detecting alcohol consumption and can detect intake up to 80 hours after use, depending on the amount and the individual’s metabolism.

How is the test done?

1. Preparation:

   • Bring the test, urine sample and any control fluid to room temperature (15-30°C).

   • Open the package just before use.

2. Sample collection:

   • Collect urine in a clean container. The test can be performed at any time of the day.

   • If urine is cloudy, allow particles to settle or filter for a clear sample.

3. Procedure:

   • Dip the test stick vertically into the urine sample for 10-15 seconds.

   • Make sure not to dip the stick too deeply (not above the MAX line).

   • Place the dipstick on a flat, non-absorbent surface.

   • Read the result after 5 minutes but not after 10 minutes.

Interpretation of results

✔️ Negative result:
Two colored lines appear – one in the control area (C) and one in the test area (T).
The → ETG level is below 500 ng/mL.

❌ Positive result:
Only one line in the control area (C), no line in the test area (T).
→ ETG level is above 500 ng/mL indicating alcohol consumption in the last 24 hours.

⚠️ Invalid result:
No line in the control area (C). The test has failed and must be repeated with a new stick.

Note: Even weak test lines count as negative.