This urine test detects 7 common drugs.
A multi-panel test is useful when you are unsure what substances the person being tested may be using.
The test works by dipping the test strip into a cup with collected urine, after which the result is read on the test device.

Cut-off levels:

• Oxycodone (OXY): 100 ng/mL
• Propoxyphene (PPX): 300 ng/mL
• Tramadol (TML): 100 ng/mL
• Opiates (OPI): 2000 ng/mL
• Fentanyl (FYL): 200 ng/mL
• Buprenorphine (BUP): 10 ng/mL
• Methamphetamine (MET): 1000 ng/mL

Instructions for use:

1. Remove the test panel from the foil pouch.
2. Pull off the protective cap to expose the absorbent area.
3. Collect urine in a clean, dry container and dip the absorbent part of the strip vertically into the sample for approx. 10–15 seconds.
   Note: Do not let the urine go above the arrow marking on the device.
4. Remove the test from the urine and place it on a flat, dry surface. Start a timer and read the result within 5 minutes.
   Do not read the result after 10 minutes.

Interpretation of results:

• NEGATIVE: Two lines appear. One red line should be in the control region (C), and another clearly visible red or pink line should be in the test region (T). This indicates that the drug concentration is below the detectable level.
  Note: The shade of red in the test region (T) may vary, but even a faint pink line indicates a negative result.
• POSITIVE: A red line appears in the control region (C). No line appears in the test region (T), indicating that the drug concentration is above the detectable level.
• INVALID: No control line appears. This may be due to insufficient specimen volume or incorrect testing procedure. Review the instructions and repeat the test with a new strip. If the problem persists, discontinue use and contact your local distributor.

The test is CE marked.