Urine Drug Test Multi 3-Panel (5 pcs)
This urine test detects 3 commonly used drugs.
A multi-panel test is ideal when you’re unsure what substances the person being tested may be using.
The test works by dipping the strip into a cup of collected urine, then reading the result on the device.

Cut-off levels:

• Marijuana, Cannabis (THC): 50 ng/mL
• Amphetamine (AMP): 1000 ng/mL
• Cocaine (COC): 300 ng/mL

Instructions for use:

1. Remove the test panel from the foil pouch.
2. Pull off the protective cap to expose the absorbent section.
3. Collect urine in a clean and dry container, then dip the absorbent tip vertically into the sample for about 10–15 seconds.
   Note: Do not allow the urine to go above the arrow marking on the device.
4. Remove the test from the urine and place it on a flat, dry surface. Start a timer and read the result within 5 minutes.
   Do not read the result after 10 minutes.

Interpretation of results:

• NEGATIVE: Two lines appear. One red line in the control region (C), and a second, clearly visible red or pink line in the test region (T). This indicates the drug concentration is below the detectable level.
  Note: The color intensity of the test line (T) may vary, but the result is negative even if the line is faint.
• POSITIVE: One red line appears in the control region (C). No line appears in the test region (T). This indicates the drug concentration is above the detectable level.
• INVALID: No line appears in the control region. The most likely reasons are insufficient sample volume or incorrect handling. Review the instructions and repeat the test with a new strip. If the issue persists, contact your local supplier.

CE marked product.