This urine test detects 3 common drugs.
A multi-panel test is useful when you are unsure which substances the person being tested may have used.
The test works by dipping the strip into a cup of collected urine, then reading the result on the device.

Cut-off levels:

• Marijuana, Cannabis (THC): 50 ng/mL
• Amphetamine (AMP): 1000 ng/mL
• Cocaine (COC): 300 ng/mL

Instructions for use:

1. Remove the test panel from the foil pouch.
2. Pull off the protective cap to expose the absorbent tip.
3. Collect urine in a clean, dry container and dip the absorbent end vertically for about 10–15 seconds.
   Note: Do not let the urine go above the arrow mark on the test device.
4. Remove the test and place it on a flat, dry surface. Start a timer and read the result within 5 minutes.
   Do not interpret the result after 10 minutes.

Interpretation of results:

• NEGATIVE: Two lines appear — one in the control region (C) and one in the test region (T). This indicates the drug concentration is below the detectable level.
  Note: The shade of red in the test line may vary, but even a faint pink line means a negative result.
• POSITIVE: One red line appears in the control region (C). No line appears in the test region (T), indicating the drug concentration is above the detectable level.
• INVALID: No control line appears. This may be due to insufficient sample volume or incorrect procedure. Review the process and repeat the test with a new strip. If the problem persists, contact your local distributor.

The test is CE marked.