THC Test 3-Panel
Our most advanced cannabis test with cut-off levels at 20 ng/mL, 50 ng/mL, and 200 ng/mL.
Designed to detect both low and high concentrations of THC, including passive exposure.

Cut-off levels:

• 20 ng/mL
• 50 ng/mL
• 200 ng/mL

How long can cannabis be detected with this test?

• 20 ng/mL:
   – Up to approx. 6 days (single use)
   – Up to approx. 12 days (occasional use)
   – Up to approx. 9 weeks (daily use)

• 50 ng/mL:
   – Up to approx. 1–4 days (single use)
   – Up to approx. 7–10 days (occasional use)
   – Up to approx. 4–8 weeks (daily use)

• 200 ng/mL:
   – Up to approx. 1–3 days (single use)
   – Up to approx. 2–4 days (occasional use)
   – Up to approx. 12–16 days (daily use)

Note: Detection times are approximate and vary by individual metabolism.

Instructions for use:

1. Remove the test panel from the foil pouch.

2. Pull off the protective cap to expose the absorbent area.

3. Collect urine in a clean, dry container and dip the absorbent tip vertically for 10–15 seconds.
   Important: Do not allow urine to go above the arrow mark.

4. Remove the strip and place it on a flat, dry surface. Start a timer and read the result within 5 minutes.
   Do not read after 10 minutes.

Result interpretation:

• NEGATIVE: Two lines appear — one in the control region (C), and one in the test region (T). Even a faint line means a negative result.

• POSITIVE: Only one line appears in the control region (C). No line in the test region (T).

• INVALID: No line appears in the control region. Possibly due to insufficient sample or incorrect procedure. Retest with a new strip.

The test is CE marked.